If you are searching for the X1E: what to buy now
The X1E was the engineering version of the X1 platform: the same 256 mm cube and CoreXY motion, but with a 320 °C hot end, a chamber that actively holds heat, an Ethernet port and heavy-duty air filtration — the features that made it suitable for engineering materials in a workshop rather than a hobby room. It reached end of life on 31 March 2026.
| Buy this |
Why |
Choose it when |
| Bambu Lab X2D |
Dual-nozzle with a 300 °C hot end and a 65 °C actively heated chamber — chamber control was the X1E’s defining feature |
You run engineering materials and need the chamber held at temperature |
| Bambu Lab H2D |
Larger-format machine for engineering work, where a 256 mm cube is the limitation |
Your parts need more than a 256 mm cube, or you want the newer platform |
| Bambu Lab P2S |
Enclosed CoreXY, hardened steel extruder and nozzle, AMS 2 Pro with filament drying |
You need abrasion-resistant hardware and enclosure, at a lower entry point than the X2D |
| CreatBot D600 Pro 2 |
Large-format industrial frame with a heated chamber |
Industrial materials in a size the desktop machines cannot reach |
If you already own an X1E
The hardware does not stop working because a model reaches end of life. What changes is the supply of parts, and Bambu Lab’s stated position for discontinued models is that spare parts and service support continue rather than ending abruptly. Nozzles, hot ends, filters and bed surfaces are the items owners actually consume — ask us what is currently available for your machine.
Frequently asked questions
Is the Bambu Lab X1E discontinued?
Yes — end of life on 31 March 2026, no longer manufactured. Its successor in the current line-up is the Bambu Lab X2D, and for larger engineering work the Bambu Lab H2D.
What was special about the X1E?
A 320 °C hot end on a hardened steel nozzle and extruder, an actively controlled chamber, an Ethernet port and heavy-duty air filtration. In practice: engineering filaments, quietly, in a workshop.
Can I still buy a new X1E in Malaysia?
Not new — manufacturing has ended. See the current range on the Bambu Lab brand page.
Is the X1E still supported?
Bambu Lab’s policy for discontinued models is continued spare-parts supply and service support rather than an immediate end. Ask us about the part you need for the current position.
Which current printer matches an X1E best?
The X2D, because the actively heated chamber was the X1E’s defining capability and the X2D is the current machine that provides it — with two nozzles as a bonus. If the work is larger than a 256 mm cube, look at the H2D or a large-format CreatBot instead.
Do you service or supply parts for X1E machines?
Talk to us with the specific part and we will tell you what is available. We would rather give you a clear answer about availability than an optimistic one.
