xTool Malaysia · Official reseller
The ultimate laser for ultra-precise engraving — a 5W 355 nm UV laser that works inside glass and crystal, and on heat-sensitive materials, without burning them.
355 nm cold processing · 3D inner engraving in glass and crystal
Malaysia
Trinventor Solution is an authorised xTool reseller. The F2 Ultra UV is professional equipment: it earns its keep in glass and crystal work, personalised drinkware, awards, memorial pieces and precision marking on materials other lasers damage. We will show you the machine running on your own material before you commit.
Machine and accessories are quoted separately — ask us for a configuration and price.
The F-series
The F series covers everything from craft-fair portables to metal production machines. Every model in it is an infrared, fibre or diode laser — the F2 Ultra UV is the only UV machine, and the only one that engraves inside glass and crystal.
Portable models — best for craft fairs and beginners
50MP camera · 6,000 mm/s · fastest on-site laser for high-volume customisation
4,000 mm/s · best entry-level laser for on-site customisation
Ultra models — best for scaling and faster production
smart camera · 10,000 mm/s · best-value all-rounder for metal, jewellery and more
dual 48MP cameras · 15,000 mm/s · colour engraving and 2 mm metal cutting
dual 48MP cameras · 15,000 mm/s · colour engraving, metal production
dual 48MP cameras · 15,000 mm/s · glass and crystal, 3D inner engraving, cold processing
Only the F2 Ultra UV does 3D inner engraving in glass and crystal, and only it can mark heat-sensitive materials without charring. Ask us which model fits your material list.
Which one, for what
Processing under the recommended parameters of xTool Studio — the machines differ in efficiency.
Only the F2 Ultra and the F1 Ultra can do 3D embossing. The only difference is power and efficiency.
Colour results, most vivid first: F2 Ultra > F1 Ultra > F2.
Cutting limits by model: F2 Ultra (2 mm brass, stainless steel, aluminium) > F1 Ultra (0.4 mm brass, 0.3 mm stainless steel, 0.2 mm aluminium). The F2 and F2 Ultra UV do not cut metal.
F2 Ultra UV wins. It excels at glass with crisp surface marks and stunning 3D internal engraving, delivering the highest clarity and consistency. Other F-series models are limited to surface engraving, and their results on transparent glass are noticeably less clear.
More material and process comparisons at a glance
3D inner engraving
A UV laser is the optimal choice for detailed glass work. It enables permanent 3D inner engraving while keeping the surface entirely untouched. From glass blocks to crystal balls and beyond, every shape becomes a one-of-a-kind piece with real collectible value — and nothing is cut, coated or cleaned up afterwards.
Engraving a 3D image inside a crystal block — the surface stays untouched.
Inner engraving uses the 70 × 70 mm field lens; the pack includes the lens, riser, a K9 test block and calibration cards, all pre-calibrated.
Surface work
The F2 Ultra UV engraves microscopic details directly on glass with no preparation and no cleanup. It supports embossing, cutting and rotary engraving too — so a single machine covers flat glass, curved drinkware and shaped parts without sending anything out.
Embossing, cutting and rotary engraving are all supported on glass with the same machine.
Workflow & precision
Traditional glass engraving is a tedious, multi-step ordeal: surface coating, long drying times and messy post-wash scrubbing that can take over an hour per piece. The F2 Ultra UV engraves direct to surface, skips the prep entirely, and turns a 20-minute process into five minutes of pure creation. Beyond speed, UV technology is what makes the fine detail possible in the first place.
Workflow and precision comparisons are the manufacturer's published figures.
Cold processing
The UV laser's high photon energy breaks molecular bonds with minimal heat — no burns, no charring, no damage. That is why surface engraving on glass comes out bright and clean instead of brown, and why thin films, silicone and delicate plastics survive the process. No pre-coating, no polishing: just clean, precise results.
Cold processing — marking heat-sensitive material with no burns, charring or damage.
No pre-coating, no post-polishing, no washing — the part is finished when it leaves the bed.
Precision
Engineered for extreme precision, the F2 Ultra UV uses an ultra-fine laser spot that is much smaller than typical fibre or CO₂ lasers. Its optimised vector-fitting algorithm, with 0.001 mm resolution, brings every detail to life with stunning clarity — small text stays legible on jewellery, components and keepsakes.
Micron-level detail — fine text and intricate patterns at 0.02 × 0.02 mm.
A 0.02 × 0.02 mm spot and 0.001 mm vector-fitting resolution.
Real users
Real businesses, incredible returns. Four UV owners on what the machine changed for them.
As an engineer, efficiency is everything. UV replaces the one-hour messy coating, engraving and washing process with ten-minute direct engraving. It handled a 102-piece wedding order effortlessly — the machine paid for itself in 2.5 months.
Since going full-time, UV became my growth engine. Adding premium details to our signature wedding bundles surged monthly sales by 3.75× — we have grown from a corner of the garage to the whole space, and are moving to a professional warehouse soon.
3D inner engraving is a new profit tier. We turn crystals into $40–$75 premium memorial pieces. At pop-up markets it draws crowds who stop to watch the live magic inside the glass, and it has secured our growth as a high-margin brand.
In my home studio quality is everything. While CO₂ leaves burn marks, UV delivers a clean, frosty look on glass and wood with zero charring. I now offer high-end memorial gifts — photo-etched hearts — that customers cherish for good.
Customer stories and figures are the manufacturer’s published case studies.
Throughput you can bank
Every UV job carries a retail price, a material cost and a profit per unit — and the material cost is tiny next to what glass and crystal pieces sell for. Six examples from the xTool lab:
Profitable from the first batch
The premium tier of keepsakes
Corporate and event orders
Marking that used to be outsourced
Fine detail at small scale
Personalised drinkware, in-house
Retail, material and profit figures shown on the cards are the manufacturer’s lab examples. Your numbers depend on your market and pricing.
Materials & ideas
The F2 Ultra UV captures fine detail on acrylic, crystal, silicone and more — where other lasers stop. Paired with Atomm, a library of thousands of ready-to-use projects and step-by-step tutorials, your next piece is one click away: from intricate 3D inner engravings to bold multi-material art.
Projects from the Atomm library, made on the xTool F2 Ultra UV.
Ready-to-use projects and tutorials live in the Atomm community library.
Vision
The industry’s first dual-camera UV laser system. Two cameras handle automatic positioning and focusing to 0.2 mm accuracy — 60% more precise than single-camera systems. Every process runs consistently, so every detail lands exactly where you imagined it.
Dual 48MP camera preview and autofocus at 0.2 mm accuracy.
0.2 mm positioning accuracy, with autofocus.
Capacity
Two switchable field lenses let the machine move between inner and surface engraving with a large workspace — the balance of power, size and engraving quality that production work needs. With the conveyor attached you gain even more flexibility and creative freedom.
Add the Auto Streamline conveyor to extend the working area for batch production.
Rotary, batch, curved
From 3D preview to perfect rotary engraving on rings, tumblers and curved parts.
Load, place and run a whole sheet of parts with camera-assisted positioning.
Mark curved glass and shaped surfaces without special fixtures.
Built to last
The F2 Ultra UV is a fully enclosed Class 4 laser system, built for a working studio. Enhanced laser sealing and drying improve humidity protection for a longer service life, and the airflow was shaped with fluid dynamics for efficient cooling and lower noise.
Enhanced laser sealing and drying for improved humidity protection and a longer lifespan.
Airflow optimised with fluid dynamics — efficient cooling, reduced noise.
Add the Fire Safety Set and SafetyPro extraction for a production-ready installation.
What makers say
We are getting some super fine detail and probably the cleanest engraving — actually it is not “probably”, it is the cleanest engraving out of any external laser so far.
What xTool has done a really good job of is making this process fairly simple. You can import a 3D model and then just place it wherever you want inside of the crystal.
The F2 Ultra UV is the jack-of-all-trades laser. It can work with almost every material across the board, and it can do 3D crystal engraving — this is the only type of laser that can do that.
With the F2 Ultra UV there is absolutely no cleanup and no signs of any residue.
Quotes from published reviews on the manufacturer’s channel partners.
In the press
“Creative tech giant xTool has a surprise debut at IFA with the F2 Ultra UV, an unusual new laser engraver tailor-made to engrave designs inside clear glass and plastics, as well as marking sensitive materials without the potential mess or emissions.”
“This is such a cool process of creating internal engraving magic, and I believe this is the first time this type of craft has been accessible to consumers — it was previously unsuitable for desktop-sized machines.”
“This versatility of the F2 Ultra UV opens the door to numerous professional applications, from customisation of high-end glassware for the restaurant trade to personalised awards and keepsakes.”
Accessories
Expand your working area and streamline engraving.
From 3D preview to perfect rotary engraving.
Hyper-flow inline duct fan.
Air purifier with the SuperCyclone system.
Effortless press, simple batching.
Rapid fire safety for unattended jobs.
Accessories are quoted separately — tell us your workflow and we will size the setup.
Specifications
| Laser type | 5W 355 nm UV (ultraviolet) laser |
| Laser spot | 0.02 × 0.02 mm |
| Working area | 200 × 200 mm standard — 70 × 70 mm for 3D inner engraving |
| Max. material height | 150 mm |
| Marking speed | Up to 15,000 mm/s |
| Vector resolution | 0.001 mm |
| Cameras | Dual 48MP, 0.2 mm positioning accuracy with autofocus |
| Field lenses | Two switchable lenses — inner engraving and surface engraving |
| Processing | Direct-to-surface cold processing: no pre-coating, no polishing, no post-wash |
| Software | xTool Creative Space (XCS) and LightBurn |
| Safety | Fully enclosed Class 4 laser system |
| Extraction | Supports SafetyPro IF2 inline fan and AP2 air purifier |
| Conveyor | Supports the Auto Streamline conveyor for batch production |
FAQ
It delivers an all-in-one, commercial-grade solution for high-speed, premium glass work. Smooth, uniform, crack-free finishes — even on thin glass — support higher-margin products, and no pre-treatment or cleaning is needed. It supports 3D inner engraving, fine surface engraving, embossing and precision cutting in one machine, which also means less competition than the usual wood-and-acrylic work.
Glass and crystal read as premium next to wood or acrylic, so customers pay more for the same personalisation. Demand is growing across weddings and events, corporate gifting, souvenirs and luxury drinkware — and bringing that work in-house gives you faster sampling, quicker turnaround and control over costs.
Yes. 5W is the golden power level for a desktop UV system: with UV, performance is not driven by wattage alone. Short wavelengths and high-energy photons break molecular bonds with minimal heat, so this “cold processing” delivers far higher energy density and precision than a comparable thermal laser. 15,000 mm/s and 3D inner engraving at around 60% power still leave headroom.
Ease of use, automation, speed, scalability and inner-engraving quality: one-click 3D model generation from an image or text with Atomm presets; dual 48MP camera automation with 0.2 mm positioning; up to 15,000 mm/s with inner-engraving algorithms up to 180% faster than standard systems; dual field lenses, the largest working area in its class and conveyor support; plus exclusive stabilisation and power compensation for even results across large areas.
One inner engraving lens, one riser, one K9 glass block for testing and calibration, and three inner engraving calibration cards. Inner and surface engraving use different lenses, and this pre-calibrated pack lets you switch between the two modes accurately.
Yes — the F2 Ultra UV is officially included in xTool’s Trade-Up Programme. Tell us what machine you are running now and we will check your eligibility and handle the submission for you locally.
Laser engraving is easiest to judge in person. Tell us what you want to mark and bring a sample to the showroom, or send us a photo and we will tell you which machine and power fits the job.
Bring us a glass block, a crystal blank or a material that keeps failing on your current laser. We will run it on the F2 Ultra UV and quote the configuration that fits your production — machine, lenses, extraction and accessories.
Talk to us about a demonstration · xTool F2 Ultra · Laser cutters
Thank you for signing up. You will be the first to know the Industry news, upcoming products, latest technology and special promotion.
Stay Tuned.
Thank you!
Your submission has been received. Someone from our team will contact you soon.
If you have any urgent issue,
please contat us by phone
@ +60 12716 8839
