Featured Partners

Reverse Engineering

Architecture Modeling
3D Printing in Architecture Modeling: A Revolution in the Making 3D printing is revolutionizing the way...
3D Printing in Dentistry Malaysia 3D printing is revolutionizing the dentistry industry in Malaysia....
Machinery Industry
3D printing is revolutionizing the machinery industry, offering faster, more affordable, and more customized...
3D Printing in Education Malaysia: Transforming STEM Learning 3D printing is a rapidly evolving technology...
No posts found

Creatbot F430

  • Big Build Volume 40cmx30cmx30cm
  • Nozzle Temperature Up To 420 ℃
  • Heated chamber Up To 70 ℃
  • Automatic bed leveling
  • Power loss recovery

Product Details

The CreatBot F430 is a versatile Industrial 3D Printer that can be used for a variety of applications, including prototyping, manufacturing, and tooling. It is also a popular choice for educational institutions and research laboratories.

Here are some of the key features of the CreatBot F430:
  • Large build volume: 400 x 300 x 300 mm
  • Dual extruders: Allows for printing with two different materials or colors at the same time
  • Heated chamber: Ensures consistent printing results, especially for high-temperature materials
  • Automatic bed leveling: Compensates for unevenness in the print bed, resulting in better first-layer adhesion
  • Filament runout detection: Pauses the print if the filament runs out, preventing wasted material and failed prints
  • Power loss recovery: Resumes the print from where it left off after a power outage

Overall, the CreatBot F430 is a powerful and versatile industrial 3D printer that is well-suited for a wide range of applications.

Nozzle Temperature Up To 420 ℃

F430 equiped with the 4th generation 1.75mm dual extruders and hotends. The left extruder equipped with 260°C hotend, It is able to print with PLA, ABS, PC, Nylon, Carbon fiber, Flexible, etc. The right extruder 420°C hotend is made of martensite steel, which is able to print high performance materials. The dual hotend is replaceable, which provide more possibility on your application.

Fully Enclosed+Hot Chamber 70°C

Fully enclosed chamber can block all external interfernce and reduce noise.
Hot chamber device provide constant room temperature 70°C,which is able to prevent prints
from warping and deform.

Outage Restore & Filament Detection

The printer will automatically memorize the current position and save print data. Lower the platform and withdraw filament when power off suddenly. It will continue to print from the last stopped point after power on. No trace! The printer will avoid invalid printing by stoping print and warning when filament runs out.

HEPA Air Filter

The air filter system can adsorb impurities and gases that generated by printing special filament like ABS, Nylon, PC, more safe and environmental protection which is more suitable for house, school, office space.

Aviation Aluminum Platform & Automatic Leveling

The printer is equipped with a heatless aviation aluminum platform with a surface flatness of 0.02mm. The surface of the platform can be attached with PEI special 3D printing film and Buildtak film. Most materials can be squeezed and adhere well to the bed. Auto leveling sensor, through the Z axis intelligent compensation table height in the printing process to achieve fully automatic leveling.

Technical Specification

Print Technology Fused Deposition Modeling(FDM)
Build Volume Single Extrusion:  400*300*300 mm
Dual Extrusion:  320*300*300 mm
Number of Nozzles Double
Filament Diameter 1.75 mm
Filament Compatibility PLA, ABS, Carbon Fiber, Wood, Nylon, PC, PETG, HIPS, PP, Flexible, TPU, PVA, PEEK, etc.
Nozzle Diameter 0.4mm (0.3 0.5 0.6 0.8 1.0mm)
Print File Type STL, OBJ, AMF, Gcode
Best Printing speed 55 mm/s
Max. Printing speed 180 mm/s
Software CreatWare, Simplify 3D, Cura, Slic3r, etc
Supported File Types STL,OBJ,AMF
Operating Systems Windowsall, macOS
Special Function
Outage Restored Save data when power is off
Filament Detection Pause printing when filament run out
Automatic Shut-down Turn off the power automatically when printing is complete
Max. Nozzle Temperature 420 ℃
Max. Bed Temperature 140 ℃
Max. Chamber Temperature 70 ℃
Power Requirements 100V-110V or 200V-240V / 50-60Hz
(Depending on your country’s default voltage)
Rated Power 220V: 2700W, 110V: 2200W
Screen 4.3” Touch Screen
Storage Media U Disk
Connectivity USB
Construction Power-Coated Steel, Aluminum Casting for Motion Components
Build Plate Aviation aluminum plate+PEI sheet
Build Plate Leveling Automatic
Extruder Directly Drive
Stepper Motors 1.8° Step Angle with 1/16 Micro-stepping
X Y Positioning Precision 12.7 μm
Z Positioning Precision 1.25 μm
Size & Weight
Product Dimensions & Weight 620*485*680 mm 48 kg
Packing Size & Weight 750*580*720 mm 62 kg

Product Video

On-Site Installation Gallery

If you are looking for consumer range products please visit here: 3D Gadgets

Product Inquiry Form

Creatbot F430

Thank you for signing up. You will be the first to know the Industry news, upcoming products, latest technology and special promotion.

Stay Tuned.


Thank you! 

Your submission has been received. Someone from our team will contact you soon.

If you have any urgent issue,
please contat us by phone
@ +60 12716 8839