Creatbot D1000

Successor of F1000, One Cubic Meter Industrial Grade Large 3D Printer.

Product Details

D1000 Large Format 3d Printer is upgraded from the model F1000.

With a build volume of over 1000*1000*1000mm, it is the perfect machine for creating large and full size parts, prototype, tools, molds, jigs & fixtures in-house. Within days you can have a fully functional high quality prototype. CreatBot big rolls filament of PLA, ABS, ASA, PA-CF, etc suit well for your big models without worrying frequent replacement of filament. All its features manufactured to the highest standards.
Every time, every parts, no mistake.

Affordable And Reliable Large size 3D printer

CreatBot D1000 was created to make industrial 3d printing of large-scale objects and prototype as easy as possible. It is an industrial 3d printer that responds to market demand and is embedded with a new smart dual extruder kit, an enclosed heated chamber, automatic leveling system and camera control for big, impressive, prints. Camera control technology allow customers to control printing process with an APP, which can get best printing quality with shortest time without failure. With a fast-heating platform and hot chamber this high-resolution large-print workhorse produces incredible results with high-quality materials. CreatBot D1000 sets a new standard in additive manufacturing and extends the material capabilities of large-scale 3d printers, it brings the possible to greatly reduce cost and time for more companies.

CreatBot D1000 will be your best choice 3D Printer in Malaysia with no doubt, if you are looking for an industrial large scale 3d printer for prototype and engineering-grade materials.
The most important, AFFORDABLE for every company!

A smaller alternative model also available : Creatbot D600 Pro2

Official Creatbot Website

CREATBOT D1000

1000*1000*1000mm
High resolution&speed
Camera control technology
Reliable 24/7
Fully enclosed

Stability

The whole-steel body not only ensure the stability during printing but also greatly extend working life. The optimization and cooperation of overall structure ensure the sustainable and efficient operation. The first batch of CreatBot 3d printers with whole-steel body have been working for 9 years and more than 30,000 hours.

Outage Restore & Filament Detection

The printer will automatically memorize the current position and save print data. Lower the platform and withdraw filament when power off suddenly. It will continue to print from the last stopped point after power on. No trace! The printer will avoid invalid printing by stoping print and warning when filament runs out.

Linear rail and Servo motors

When it reachs to 1000mm+ length, small rail have big deflection. The D1000 accurate linear rail structure is very thick and strong. It won’t deform or loss precision after print head million times shock. With servo motors, timeliness, fast response, no inertia, no delay. closed-loop control of position overcome the problem of lossing step. heat and noise are significantly reduced. It gives print model ultra high performance with high speed.

Hot Chamber + Filament Dry Room

60°C hot chamber ensures print quality for high performance materials. The fully enclosed chamber can block all external interference. Also this frame can reduce noises, at the same time to provide constant temperature, so that the model won't deform. The filament dry room provides chamber temperatures of 45°C and 65°C to dry 2*5kg/roll filament like PLA, nylon, PC, ABS and other materials with water absorption.

Auto Leveling Platform

Use of 100 points through the high precision servo probe to save the level of platform flatness data at the initial, through the Z axis intelligent compensation table height in the printing process to achieve fully automatic leveling.

HEPA Air Filter

The air filter system can adsorb impurities and gases that generated by printing special filament like ABS, Nylon, PC, more safe and environmental protection which is more suitable for house, school, office space.

Camera Control Technology

Camera control technology allow customers to control printing process on speed,pause,temp.etc with an APP remotely, which can get best printing quality with shortest time without failure. A very useful feature on large model and long time printing.

Auto-rising Dual Extruders 420 ℃

Printing in single and dual-extrusion modes

Technical Specification

Printing
Print Technology	Fused Deposition Modeling
Build Volume	Single Extrusion: 100010001000 mm Dual Extrusion: 94010001000 mm
Number of Nozzles	Auto-rising dual extruders
Layer Resolution	0.05 mm
Filament Diameter	1.75 mm
Filament Compatibility	ABS,PLA,Carbon Fiber,PETG,Nylon,PC,etc.
Nozzle Diameter	1.0 mm（0.4~1.5 mm optional）
Print File Type	STL, OBJ, AMF, Gcode

Speed
Best Printing speed	60 mm/s
Max. Printing speed	120 mm/s

Software
Software	CreatWare, Simplify 3D, Cura, Slic3r, etc
Supported File Types	STL,OBJ,Gcode,AMF
Operating Systems	Windowsall, macOS

Special Function
Outage Restored	Save data when power is off
Filament Detection	Pause printing when filament run out
Automatic Shut-down	Turn off the power automatically when printing is complete
Camera control	Camera remote monitoring and real-time control of the printing process

Temperature
Max. Nozzle Temperature	420 ℃
Max. Bed Temperature	100 ℃
Hot Chamber Temperature	60 ℃
Filament Dry Room Temperature	45 ℃/65 ℃

Mechanical
Construction	Power-Coated Steel, Aluminum Casting for Motion Components, POM
Build Plate	Aviation aluminum plates
Build Plate Leveling	Automatic
Extruder	Smart Dual Extruders
Stepper Motors	1.8° Step Angle with 1/16 Micro-stepping
X Y Positioning Precision	0.011 mm
Z Positioning Precision	0.0025 mm

Electrical
Power Requirements	220~240 V, 50~60 Hz
Screen	9.7-inch full color touch screen independent operating system (multi-language)
Rated Power	Printer: 4000W, Chamber: 4500W
Storage Media	U Disk
Connectivity	USB