CREATBOT MALAYSIA · ONE-CUBIC-METRE INDUSTRIAL FDM
The ultimate in-house solution — an industrial-grade one-cubic-metre 3D printer with a 1050 × 1050 × 1050 mm build chamber, stable 600 mm/s motion, dual 420 °C extruders and an 80 °C heated chamber. Large full-size parts, prototypes, moulds and tooling, produced on your floor.
The D1000 Pro HS is the high-speed evolution of the D1000 — deeply developed Klipper motion, a record 90 mm³/s hotend and five times the speed of the model it replaces, on a 675 kg steel platform.
On a 1050 mm platform, the first layer decides everything. The D1000 Pro HS maps the entire bed automatically with eddy-current sensing before every job — contact-free, zero wear, no feeler gauges.
A uniform first layer across a one-metre plate is what makes single-piece large-format parts reliable — and what lets 600 mm/s actually pay off.
A record-breaking 90 mm³/s flow rate and stable 600 mm/s printing — the motion system was rebuilt for speed, not just retuned.
An HD macro camera with AI visual recognition aligns XY to 0.02 mm; dual photoelectric sensors set Z to 0.005 mm — hands-off, every change.
A mechanical shutter seals the idle nozzle the instant it lifts. If the main spool runs out, printing continues on the second nozzle — uninterrupted.
Heat to 400 °C in about two minutes with ±0.15 °C stability; topologically optimised lightweight printhead for higher speeds and greater agility.
Double-layer insulation raises and holds the cavity at 80 °C for large ABS, ASA, PC and PA-CF parts — less warping, stronger layer bonding.
The safeguards that let you leave a one-cubic-metre build running — sensors, protection and recovery on every subsystem.
Four independent motors with anti-tilt torque correction keep gantry and plate parallel on a one-metre platform — flatness corrected continuously.
At 1000 mm+ travel, small rails deflect. Heavy-duty linear guides and servo drives keep full speed smooth and precise across the whole plate.
An integrated, timed drying compartment keeps nylon, PC and CF materials print-ready — fewer bubbles, less stringing, consistent strength.
The interlocked door pauses the machine the moment it opens — safe for shared workshops, labs and production floors.
A medical-grade pump drives constant, quiet airflow with printhead thermal protection — engineered for 24/7 operation.
Power loss saves the exact position and resumes on restart; run-out pauses and alerts; backup mode switches nozzles to finish the job.
Camera control lets you adjust speed, pause and temperature remotely from the app — or run fully offline over USB, LAN or local network, no internet needed.
CreatWare, cloud, LAN or fully offline — control the printer, send sliced files and update firmware your way.
A heated chamber is easy to add; keeping a one-metre machine dimensionally stable at 80 °C is the hard part. As the chamber warms, the frame and gantry expand too — metal growth, axis misalignment and micro-distortions that stack up layer by layer.
CreatBot's answer is two patented technologies working together. The Intelligent Chamber Heating Algorithm predicts irregular deformation caused by chamber temperature changes, while Z-Axis Magic Box applies real-time thermal compensation to the frame and build plate. The result: flawless prints even when the machine itself has moved.
Machine weight matters. At 675 kg, the D1000 Pro HS steel structure resists distortion far better than light enclosures — and compensation handles the rest.
Large moulds and tooling produced in-house — within days you can hold a fully functional prototype.
Case study: a global automotive systems supplier develops high-pressure seat moulds for major OEM programmes on the D1000 Pro HS — nylon carbon fibre at 50% infill, validated at 100 MPa. Large-format parts like these ship every day from machines just like it.
Seat mould tooling printed in nylon-CF and validated for 100 MPa press service — production tooling, not mock-ups. Hover to play.
A 950 × 661 × 212 mm AGV robot housing printed in one piece — no assembly, no gluing.
Large moulds and forming tools printed for in-house production lines — tooling days after the design freeze.
Ribbed internal structures at 50% infill — stiffness where the part needs it, weight where it doesn't.
When one metre stops being a prototype size, production floors run fleets of D1000 machines.
From a single machine to a production cell — the D1000 Pro HS anchors in-house manufacturing capacity.
From everyday PLA to PA-CF, PC-CF, PET-CF, PPS-CF and UltraPA-CF — supported by the 80 °C chamber, 420 °C hotend, 120 °C bed and filament dry room, with large 2 × 5 kg spools. Ask us for a print profile for your material.
Delivery, installation and first-print commissioning across Peninsular Malaysia — Sabah and Sarawak by arrangement.
On-site or online onboarding: slicer workflow, material profiles, chamber recipes and calibration routines for your parts.
Nozzles, hotends, filters, plates, belts and common consumables kept locally — not ordered from overseas.
Maintenance and print-quality troubleshooting from a team that runs industrial FDM machines every working day.
Serving Kuala Lumpur, Selangor, Penang, Johor, Ipoh, Kuantan, Kota Kinabalu and Kuching.
Everything below is the manufacturer's published specification for the machine we supply, install and support.
| Print technology | FDM / FFF, dual extruder |
|---|---|
| Build volume | 1050 × 1050 × 1050 mm single extrusion 995 × 1050 × 1050 mm dual extrusion |
| Extruder | Auto-raising dual extruders with dual nozzle shutter |
| Layer resolution | 0.05 mm |
| Nozzle diameter | 0.6 mm standard 0.3 / 0.4 / 0.6 / 0.8 / 1.0 mm options |
| Filament diameter | 1.75 mm |
| Materials | PLA, ABS, ASA, PP, PETG, PC, Nylon, TPU, ABS-CF, PC-CF, PET-CF, PET-GF, UltraPA-CF, PPS-CF, PA-GF, PA-CF, PA-ABS, PC-ABS, PP-GF, PP-CF and more |
| Print file type | G-code; large 2 × 5 kg spool support |
| Max print speed | 600 mm/s |
|---|---|
| Flow rate | 90 mm³/s |
| Max nozzle temperature | 420 °C |
| Max bed temperature | 120 °C |
| Max chamber temperature | 80 °C |
| Dry room temperature | 0–70 °C, timed |
| Thermostat accuracy | ±0.15 °C |
| XY / Z precision | 0.00375 mm / 0.00156 mm |
| Firmware | Klipper — high speed |
|---|---|
| Display | 10-inch full colour touchscreen, independent multi-language OS |
| Slicers | CreatWare, Orca Slicer, Cura, Simplify3D, Prusa and compatible |
| File types | Gcode, STL, 3MF, OBJ, AMF, STP, STEP |
| Operating systems | Windows / macOS |
| Connectivity | USB, WiFi, LAN — completely offline operation supported |
| Camera control | Remote monitoring and control of long prints |
| Sensors | Safety door lock, filament detection, outage restore, backup mode |
| Build plate | Aviation aluminium + removable magnetic sheet, automatic eddy-current leveling |
|---|---|
| Z-axis structure | Independent Quad-Z axis |
| X/Y guide rails | Heavy-duty linear guides with servo motors |
| Machine size | 1870 × 1430 × 1940 mm |
| Machine weight | 675 kg |
| Packing | 2010 × 1560 × 2180 mm, 892 kg |
| Power requirements | 220–240 V, 50–60 Hz |
| Rated power | 6000 W printer + 6000 W chamber |
| Air filter | HEPA + activated carbon, 99.995% adsorption |
Manual: CreatBot D1000 Pro HS user manual (English, PDF) — official manufacturer documentation.
Official films from CreatBot's channel — plus one from our own showroom floor — the arrival film, a full-size AGV housing build, a technical deep dive and an unboxing walkthrough.
▶
The official D1000 Pro HS arrival film — 1-metre parts in-house at 5× speed
▶
A 950 mm ABS AGV robot housing, printed in one piece
▶
D1000 Pro HS technical deep dive — 1050 mm large-format printing
▶
Large-format D1000 Pro HS unboxing tutorial
▶
Presented by Trinventor Solution Malaysia — industrial 3D printing, 5× faster
A massive 1050 × 1050 × 1050 mm build volume — over one cubic metre — enables one-piece printing of automotive body panels, aerospace structural components, architectural models and large moulds, with no assembly or gluing.
Yes. With a 420 °C hotend, 80 °C heated chamber and 120 °C build plate — plus an integrated filament dry room — it reliably prints PA, PC, ABS-CF and other engineering-grade materials for industrial functional parts.
No. 600 mm/s printing is paired with 0.001 mm eddy-current bed leveling and an independent Quad-Z axis with real-time compensation, ensuring outstanding layer consistency and dimensional precision even at high speed.
The auto-raising dual extruders with mechanical nozzle shutters enable soluble supports, multi-material composites and dual-colour marking — dramatically reducing post-processing for internal cavities, overhangs and functional multi-material parts.
Full-vehicle prototypes, bumpers, interior trim, tooling fixtures and functional test parts for automotive; large non-metallic structural parts, cabin interior components, wind-tunnel models and lightweight prototypes for aerospace — accelerating development and cutting mould costs.
Yes. Power-loss recovery, filament run-out detection, dual-nozzle backup mode and external air cooling support uninterrupted 24/7 operation, with remote camera monitoring so no dedicated operator is required.
Two patented systems work together: the Intelligent Chamber Heating Algorithm predicts and counteracts deformation from chamber temperature changes, and Z-Axis Magic Box applies real-time thermal compensation to the frame and build plate. The 675 kg steel monocoque structure further resists distortion.
The machine measures 1870 × 1430 × 1940 mm and weighs 675 kg, running on 220–240 V with 6000 W rated for the printer plus 6000 W for the chamber. We advise on flooring, power and siting during the site survey.
Price depends on the configuration: machine, nozzle set and accessories, plus delivery, installation, commissioning and operator training. Request a quote and we will send a complete Malaysian quotation with lead time.
Yes. Bring a part file or sample to our Kuala Lumpur showroom and we will print it in front of you, or ask for an on-site demo at your premises. See the D600 Pro3 HS and D400 HS while you are there.
Harga bergantung pada konfigurasi mesin, set nozzle dan aksesori, termasuk penghantaran, pemasangan, pentauliahan dan latihan operator. Hubungi kami untuk sebut harga lengkap di Malaysia.
Ya — ruang binaan lebih satu meter padu (1050 × 1050 × 1050 mm) dengan kebuk panas 80 °C, bilik pengering filamen dan sokongan gelendong besar 2 × 5 kg membolehkan komponen besar dicetak dalam satu keping. Kami menyediakan pemasangan, latihan dan sokongan tempatan.
Tell us what you print — material, part size and volume — and we will quote the D1000 Pro HS configured for your facility, including delivery, installation, commissioning and operator training in Malaysia. Want to see it first? Book a demo in Kuala Lumpur and bring a part file.
Prefer to talk first? Contact our team or WhatsApp us — or browse the rest of the CreatBot range, including the D600 Pro3 HS and D400 HS.
Image and video courtesy of CreatBot for visual reference. All copyrights belong to their respective owners. Should any rights concerns arise, please kindly notify us for prompt removal.
Thank you for signing up. You will be the first to know the Industry news, upcoming products, latest technology and special promotion.
Stay Tuned.
Thank you!
Your submission has been received. Someone from our team will contact you soon.
If you have any urgent issue,
please contat us by phone
@ +60 12716 8839
