CREATBOT MALAYSIA · LARGE-FORMAT HIGH-SPEED FDM
The industrial benchmark for professional large-format FDM — a 620 × 620 × 620 mm heated build chamber, stable 600 mm/s motion and dual 420 °C extruders, on the platform that made the D600 Pro series the world's best-selling professional large-format 3D printer.
The D600 Pro series has been refined across six years of market use and roughly thirty detail upgrades. The Pro3 HS adds deeply optimised Klipper motion, a high-flow hotend and the sensor suite of an industrial machine.
On a 620 mm platform, the first layer decides everything. The D600 Pro3 HS maps the entire bed automatically with eddy-current sensing before every job — contact-free, zero wear, no feeler gauges.
A uniform first layer across the whole plate is what makes single-piece large-format parts reliable — and what lets 600 mm/s actually pay off.
Stable 600 mm/s and 90 mm³/s through deeply optimised Klipper motion — the motion system was rebuilt, not just retuned.
An HD macro camera with AI visual recognition aligns XY to 0.02 mm; dual photoelectric sensors set Z to 0.005 mm — hands-off, every change.
A mechanical shutter seals the idle nozzle the instant it lifts. If the main spool runs out, printing continues on the second nozzle — uninterrupted.
Heat to 400 °C in about two minutes with ±0.15 °C stability; hotends swap for 0.3–1.0 mm nozzles. Topologically optimised, lightweight printhead.
Double-layer insulation raises and holds the cavity at 80 °C for large ABS, ASA, PC and PA-CF parts — less warping, stronger layer bonding.
The safeguards that let you leave a 620 mm build running — sensors, protection and recovery on every subsystem.
Four independent motors with anti-tilt torque correction keep gantry and plate parallel — flatness is corrected continuously, not set once.
Large-format gantries flex; these rails and servo drives don't. Full speed stays precise across the whole plate.
An integrated, timed drying compartment keeps nylon, PC and CF materials print-ready — fewer bubbles, less stringing, consistent strength.
The interlocked door pauses the machine the moment it opens — safe for shared workshops, labs and production floors.
A medical-grade pump drives constant, quiet airflow with printhead thermal protection — engineered for continuous operation.
Power loss saves the exact position and resumes on restart; run-out pauses and alerts; backup mode switches nozzles to finish the job.
Monitor long prints remotely over WiFi or LAN — or run fully offline from USB. Files, control and firmware updates, no internet needed.
A heated chamber is easy to add; keeping a 620 mm machine dimensionally stable at 80 °C is the hard part. As the chamber warms, the frame and gantry expand too — metal growth, axis misalignment and micro-distortions that stack up layer by layer.
CreatBot's answer is two patented technologies working together. The Intelligent Chamber Heating Algorithm predicts irregular deformation caused by chamber temperature changes, while Z-Axis Magic Box applies real-time thermal compensation to the frame and build plate. The result: flawless prints even when the machine itself has moved.
Machine weight matters. At 250 kg, the D600 Pro3 HS steel structure resists distortion far better than light enclosures — and compensation handles the rest.
Z-Axis Magic Box — real-time compensation for frame and build-plate expansion, followed from the printer or the CreatBot app.
D600 Pro-series parts don't stay on a desk — they go into engine bays, onto the dyno and onto the track.
Duct after duct in high-strength nylon alloy, ready to fit — small-series production without tooling.
A D600 Pro-built intake credited in a half-mile record build — working parts, not display models.
High-temperature nylon components that survive heat cycling and vibration inside real engine bays.
Components supporting record runs — printed, fitted, tested and run hard.
Ducts, housings and adapters with fine internal detail — printed as single parts, no assembly.
Parts that get measured before they get fitted — the engineering standard this platform is bought for.
From everyday PLA to PA-CF, PC-CF, PET-CF, PPS-CF and UltraPA-CF — with the 80 °C chamber, 420 °C hotend and filament dry room to match. Ask us for a print profile for your material.
Delivery, installation and first-print commissioning across Peninsular Malaysia — Sabah and Sarawak by arrangement.
On-site or online onboarding: slicer workflow, material profiles, chamber recipes and calibration routines for your parts.
Nozzles, hotends, filters, plates, belts and common consumables kept locally — not ordered from overseas.
Maintenance and print-quality troubleshooting from a team that runs industrial FDM machines every working day.
Serving Kuala Lumpur, Selangor, Penang, Johor, Ipoh, Kuantan, Kota Kinabalu and Kuching.
Everything below is the manufacturer's published specification for the machine we supply, install and support.
| Print technology | FDM / FFF, dual extruder |
|---|---|
| Build volume | 620 × 620 × 620 mm |
| Extruder | Auto-raising dual extruders with dual nozzle shutter |
| Layer resolution | 0.05 mm |
| Nozzle diameter | 0.4 mm standard 0.3–1.0 mm optional |
| Filament diameter | 1.75 mm |
| Materials | PLA, ABS, ASA, PP, PETG, PC, Nylon, TPU, ABS-CF, PC-CF, PET-CF, PET-GF, UltraPA-CF, PPS-CF and more |
| Print file type | G-code |
| Max print speed | 600 mm/s |
|---|---|
| Flow rate | 90 mm³/s |
| Max nozzle temperature | 420 °C |
| Max bed temperature | 120 °C |
| Max chamber temperature | 80 °C |
| Dry room temperature | 0–70 °C, timed |
| Thermostat accuracy | ±0.15 °C |
| XY / Z precision | 0.00375 mm / 0.00156 mm |
| Firmware | Klipper — high speed |
|---|---|
| Display | 7-inch touchscreen |
| Slicers | CreatWare, OrcaSlicer, Cura and compatible slicers |
| File types | Gcode, STL, 3MF, OBJ, AMF, STP, STEP |
| Operating systems | Windows / macOS |
| Connectivity | USB, WiFi, LAN — full offline operation supported |
| Camera control | Remote monitoring of long prints |
| Sensors | Safety door lock, filament detection, outage restore, backup mode |
| Build plate | Aviation aluminium + removable magnetic sheet, automatic eddy-current leveling |
|---|---|
| Z-axis structure | Independent Quad-Z axis |
| X/Y guide rails | Heavy-duty linear guides with servo motors |
| Machine size | 1150 × 950 × 1250 mm |
| Machine weight | 250 kg |
| Packing | 1175 × 1015 × 1405 mm, 290 kg |
| Power requirements | 240 V, 50–60 Hz |
| Rated power | 2500 W printer + 3000 W chamber |
| Air filter | HEPA + activated carbon, 99.995% adsorption |
Manual: CreatBot D600 Pro3 HS user manual (English, PDF) — official manufacturer documentation.
Official films from CreatBot's channel — the launch film, large-scale prints and an unboxing walkthrough.
The 620 × 620 × 620 mm build volume allows one-piece printing of automotive components, aerospace tooling fixtures and large prototypes — no splitting or bonding.
Yes. With the 80 °C active heated chamber and an integrated filament dry room, it reliably prints PA, PC, ABS-CF, PET-CF and other high-performance engineering materials while minimising warping and moisture absorption.
No. Up to 600 mm/s print speed combines with 0.001 mm-class eddy-current leveling compensation and topologically optimised motion to balance speed and accuracy — even on the full 620 mm plate.
Soluble or breakaway support material for complex internal geometry, multi-material combinations and dual-colour marking — plus backup mode: if the main nozzle's filament runs out, the second nozzle takes over and printing continues.
Yes. Power-loss recovery, filament run-out detection, nozzle-backup switching and remote camera monitoring work together to enable unattended, continuous long-run printing.
Two patented systems work together: the Intelligent Chamber Heating Algorithm predicts and counteracts deformation from chamber temperature changes, and Z-Axis Magic Box applies real-time thermal compensation to the frame and build plate. The 250 kg steel structure further resists distortion.
Yes. The 7-inch touchscreen, Klipper-based firmware, automatic mesh bed leveling and full-auto dual-nozzle calibration mean an experienced engineer is productive quickly, with minimal training.
Price depends on the configuration: machine, nozzle set and accessories, plus delivery, installation and operator training. Request a quote and we will send a complete Malaysian quotation with lead time.
Yes. Bring a part file or sample to our Kuala Lumpur showroom and we will print it in front of you, or ask for an on-site demo at your premises. See the D400 HS and D1000 Pro HS while you are there.
Harga bergantung pada konfigurasi mesin, set nozzle dan aksesori, termasuk penghantaran, pemasangan dan latihan operator. Hubungi kami untuk sebut harga lengkap di Malaysia.
Ya — ruang binaan 620 × 620 × 620 mm dengan kebuk panas 80 °C dan bilik pengering filamen membolehkan komponen besar dicetak dalam satu keping menggunakan bahan kejuruteraan seperti PA-CF dan PC. Kami menyediakan pemasangan, latihan dan sokongan tempatan.
Tell us what you print — material, part size and volume — and we will quote the D600 Pro3 HS configured for your facility, including delivery, installation and operator training in Malaysia. Want to see it first? Book a demo in Kuala Lumpur and bring a part file.
Prefer to talk first? Contact our team or WhatsApp us — or browse the rest of the CreatBot range, including the D400 HS and D1000 Pro HS.
Image and video courtesy of CreatBot for visual reference. All copyrights belong to their respective owners. Should any rights concerns arise, please kindly notify us for prompt removal.
Thank you for signing up. You will be the first to know the Industry news, upcoming products, latest technology and special promotion.
Stay Tuned.
Thank you!
Your submission has been received. Someone from our team will contact you soon.
If you have any urgent issue,
please contat us by phone
@ +60 12716 8839
