MYYARD MALAYSIA · OFFICIAL RESELLER
The compact smart vacuum former — A4 sheets, an 80 W industrial pump pulling up to −90 kPa, and three-minute heating, for moulds, packaging and product samples straight from your desk.
FORMART S brings the parts of a factory vacuum former — the pump, the even heating, the material control — to a machine that fits beside your computer.
Choose a sheet profile on the display — the machine sets the heat and timing, and dries the sheet first if it needs it.
Quick-lock the sheet, place your mould, and let the carbon-quartz heater and pump do the pull — about three minutes, start to finish.
Stop the frame at any height, lift the finished part, and start the next sheet — without removing the mould between pulls.
FORMART S forms standard A4-size sheets — plastic you can buy anywhere, in 0.3 to 3.0 mm thicknesses — on a machine that measures just 50 × 46 × 31 cm and weighs 12.8 kg. Print, cast or CNC a master model, and form your first part on the same day.
Forming area 260 × 168 mm · maximum draw 16 cm · sheet thickness 0.3–3.0 mm.
Smart controls and an industrial pump, so the tenth mould looks like the first.
Blister packs, trays, shells and moulds come off the bed ready to trim — a new part every few minutes.
Standard 30 × 20.5 cm sheets, 0.3–3.0 mm — no proprietary stock, and easy to source in Malaysia.
The 80 W pump pulls up to −90 kPa with tunable flow, so thin sheets pull gently and deep draws get full vacuum.
50 × 46 × 31 cm and 12.8 kg — the FORMART S lives on a workbench, a shop counter or a home-office desk, and still draws industrial vacuum. When the job is done it stores on a shelf, out of the way.
The hardware decisions that separate a workshop tool from a toy.
A machined wooden bed absorbs less heat than metal, so detail stays crisp even on fine moulds.
Lock the frame with a turn, and stop it wherever you like to swap sheets without touching the mould.
Carbon-fibre quartz elements heat the whole sheet evenly in about three minutes — failed pulls cost minutes, not hours.
A dehumidifying program controls drying parameters per plastic, so bubbles and cloudiness stay out of your parts.
One machine covers mould making, packaging and product development — from hand-made soap and chocolate moulds to resin earrings, packaging blisters and classroom projects.
Moulds for soap, candles and wax melts, formed in minutes, not weeks.
Chocolate and dessert moulds for small-batch pastry and confectionery work.
Blister packs and inserts for retail products, made to fit without an MOQ.
Moulds for resin jewellery and charms — fine detail the industrial pump can hold.
Concrete and plaster planter moulds, ready for repeat pours.
Scented stone and diffuser moulds formed from LDPE masters.
Classroom projects that show the whole thermoforming story end to end.
Reusable forming moulds for cement and plaster products.
Delivery, setup and first-part commissioning across Peninsular Malaysia — Sabah and Sarawak by arrangement.
On-site or online onboarding: sheet handling, material profiles, mould setup and vacuum tuning for your parts.
Heating elements, seals, pumps, forming sheets and consumables kept locally, not ordered from overseas.
Maintenance and process troubleshooting from a team that runs vacuum forming machines every working day.
Serving Kuala Lumpur, Selangor, Penang, Johor, Ipoh, Kuantan, Kota Kinabalu and Kuching.
Everything below is the manufacturer's published specification for the machine we supply and install.
| Forming area | 260 × 168 mm |
|---|---|
| Maximum draw | 16 cm |
| Sheet size | 30 × 20.5 cm (A4) |
| Sheet thickness | 0.3–3.0 mm |
| Heating temperature | 60–230°C |
| Maximum vacuum | −90 kPa |
| Pump | 80 W AC induction, built in |
| Machine dimensions | 50 (W) × 46 (H) × 31 (D) cm |
| Machine weight | 12.8 kg |
| Power requirements | 220–240 VAC @ 800 W 100–120 VAC version also available |
| Display | 3.5-inch full-colour LCD, 480 × 320 |
| Included with the machine | Starter sheet pack (30 × HIPS), cat-bowl mould set, webbing remover kit, USB cable, heat-resistant gloves, basic tool kit |
|---|---|
| Optional | Volume control kit, microporous forming bed, stainless forming bed, LDPE sheet packs |
| Made in | Taiwan |
| Support | Delivery, installation and training across Malaysia |
Installation note: the FORMART S runs on a standard Malaysian 220–240 V socket — no special power or compressed air needed.
Both films open on MYYARD's official channel; the clips below play on hover or tap.
Moulds for chocolate, soap, candles, resin and cement; blister packaging and inserts for retail products; trays and formed parts for models, cosplay and STEAM kits; and custom moulds for just about any hand-made product. It forms standard A4 (30 × 20.5 cm) sheets up to 16 cm deep, in thicknesses from 0.3 to 3.0 mm.
FORMART S ships with a 17-material database plus five custom settings, covering the common thermoforming plastics — PETG, HIPS, ABS, PVC, acrylic and more — in 0.3–3.0 mm. Original sheets and third-party A4 sheets both work: tell us what you plan to form and we will confirm the right sheet and profile.
Price depends on the configuration: the machine, a sheet starter pack, optional accessories and operator training. Request a quote and we will send a complete Malaysian quotation with delivery, installation and onboarding included.
The FORMART S is the compact A4 desktop machine — 260 × 168 mm forming area, up to 16 cm of draw and a 12.8 kg body. The MYYARD FORMOVA is the light-industrial model with a 57 × 42 cm forming area for larger parts, and the MYYARD FORMART 2 sits between them. Tell us the biggest part you need to form and we will recommend the one that fits.
Yes. Bring a sample sheet and your master model to our Kuala Lumpur showroom and we will run your part in front of you, or ask for an on-site demo so we can form it at your premises.
Yes. Delivery, setup and first-part commissioning are included across Peninsular Malaysia, with on-site or online training for your team. Heating elements, seals, pumps, sheets and common consumables are stocked locally so production does not wait on overseas shipping.
Harga bergantung pada konfigurasi — mesin, pek helaian (sheet) permulaan, aksesori pilihan dan latihan operator. Hubungi kami untuk sebut harga lengkap di Malaysia termasuk penghantaran, pemasangan dan latihan.
Jika produk anda kecil hingga sederhana — coklat, sabun, bungkus blister, tray atau komponen model — FORMART S dengan kawasan pembentukan 260 × 168 mm dan helaian bersaiz A4 sesuai untuk meja kerja. Untuk panel besar, siri FORMOVA dengan kawasan 57 × 42 cm lebih sesuai. Beritahu kami saiz produk terbesar anda dan kami akan syorkan mesin yang tepat.
Tell us what you need to make — part size, sheet and material — and we will quote the FORMART S, sheets and training in one Malaysian price. Prefer to see it first? Book a showroom demo in Kuala Lumpur and bring your master model.
Prefer to talk first? Contact our team or WhatsApp us — or browse the rest of our MYYARD range, including the light-industrial FORMOVA.
Image and video courtesy of MYYARD for visual reference. All copyrights belong to their respective owners. Should any rights concerns arise, please kindly notify us for prompt removal.
Thank you for signing up. You will be the first to know the Industry news, upcoming products, latest technology and special promotion.
Stay Tuned.
Thank you!
Your submission has been received. Someone from our team will contact you soon.
If you have any urgent issue,
please contat us by phone
@ +60 12716 8839
