Bambu Lab A1 mini

Multi-color Printing
Plug-N-Play
Full-Auto Calibration
Auto Bed-Level

Product Details

Bambu Lab A1 Mini: The Next-Generation of Affordable 3D Printer for Everyone

Bambu Lab Malaysia Official Partner

The Bambu Lab A1 Mini is a revolutionary new 3D printer that offers a wide range of Next Genaration features and benefits, making it the perfect choice for both beginners and experienced users alike.

Features Highlight:

AMS Lite Multi-Color Printing

The Bambu Lab A1 Mini is compatible with the Bambu Lab AMS Lite, which allows you to print with up to four colors simultaneously. This opens up a whole new world of possibilities for makers and designers.

Full-Auto Calibration

The Bambu Lab A1 Mini features full-auto calibration, which takes the guesswork out of setting up your printer. With just a few clicks, the A1 Mini will calibrate itself and be ready to print.

Active Flow Rate Compensation

The Bambu Lab A1 Mini also features active flow rate compensation, which ensures that your prints are always consistent and accurate. This is especially important when printing with multiple colors or materials.

High-Speed Precision

The Bambu Lab A1 Mini can print at speeds of up to 500mm/s, while still producing high-quality prints. This means that you can get your prints done quickly and efficiently.

Intuitive UI As Easy As Your Smart Phone

The A1 Mini has an intuitive user interface that is as easy to use as your smartphone. You can control the printer and start prints directly from the touchscreen display.

Active Motor Noise Canceling

Features active motor noise canceling, which makes it one of the quietest 3D printers on the market. This is perfect for printing at night or in other noise-sensitive environments.

Quick Swap Nozzles

Features quick swap nozzles, which makes it easy to change nozzles depending on the material you are printing with.

Camera Lens Cover

The Bambu Lab has a built-in camera with a lens cover. Forget about the sticker, physically block the camera with a simple mechanism.

All-Metal Frame, Bearings and Rails

Features an all-metal frame, bearings, and rails. This makes it a very durable and reliable printer.

AMS lite
Multi-color Printing For Everyone

The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.

Full-Auto Calibration

Goodbye to Tedious Manual Calibration And Tuning

A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.

Active Flow Rate Compensation
Print Smooth At Every Corner, Always

The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.

High-speed Precision
Bed Slinger with CoreXY- Speed And Quality

Full-metal Rails, Rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.

Print Silently
Active Motor Noise Canceling

Active Motor Noise Canceling and Silent Mode can bring down the noise level to under 48 dB, making A1 mini one of the quietest 3D printers on the market, so you can take a nap while your printer is working hard.

Want to see it before you decide? Tell us what you need to make or measure and we will point you at the right machine — or book a demo and watch it run: at our Kuala Lumpur showroom, or on-site at your premises.

Enquire Now Book a Demo

Privacy, Camera Lens Cover

Swift Maintenance, Quick Swap Nozzles

Comprehensive Filament Monitoring

A clogged nozzle or tangled filament can ruin prints. Traditional sensors cover few failure scenarios. In the A1 mini and AMS Lite, we've introduced a comprehensive filament monitoring system with tension, position, and pressure sensors. The AMS Lite also has a filament odometer. These sensors and advanced algorithms swiftly detect filament issues, preserving print quality.

Linear Rails

In 3D printers, rails are crucial for durability and accuracy. The A1 mini uses high-quality all-metal rails on the X and Z axes and an all-metal Linear Guide on the Y axis. These rails minimize user adjustments, needing only regular lubrication to maintain precision and lifespan.

Active Vibration Compensation

Active Vibration Compensation, like Input Shaping in other firmware, is crucial for speed. The control system must understand the system's vibration characteristics (frequency and amplitude of all axes). Parameters set during production can drift due to temperature, belt tension, or build plate changes. To ensure optimal parameters for top print quality, , we have installed sensors on both the toolhead and the heatbed, allowing for the measurement of the parameters of the X and Y axes before every print.

Full-Auto Leveling

The A1 mini's full-auto ABL uses nozzle as the probe, which measures absolute distance. Bed leveling is fully automatic with zero manual adjustment needed.

Real-time Monitoring

You can remotely control and monitor your A1 mini with the Bambu Handy App or Bambu Studio. You can see what's going on even if you're not on site.

Active Motor Noise Canceling

Stepper motors can be noisy, especially at high speeds. Injecting high-frequency movements into the motor via the drive can reduce noise, but it depends on each motor's characteristics. The A1 mini uses sensors and algorithms to identify unique motor noise patterns during calibration, helping to cancel portion of the motor noise.

RFID Sync

While AMS lite is compatible with most filaments on the market, it uses RFID to detect Bambu Filament with RFID tag, and automatically apply the best suited settings for them. It also enable you to monitor the filament usage, remotely.

Active Flow Rate Compensation

The melted plastic's flow differs from XYZ axes movement and can cause issues at high speeds. Active flow rate compensation predicts and adjusts plastic flow for accurate extrusion. Traditionally, we calibrated by printing lines with acceleration, but this was time-consuming and space-wasting. The A1 mini uses novel method to measure the nozzle pressure to obtain parameters directly before each print, saving time and build plate space.

Where the A1 Mini fits, and what to buy instead

The A1 Mini is the small, open-frame printer in the Bambu Lab range: a 180 × 180 × 180 mm build, full-auto calibration so there is nothing to tune, and the AMS Lite for four-colour printing. It suits PLA, PETG and TPU work — models, prototypes, jigs and everyday parts — and it is the least expensive way into the ecosystem.

The trade-off is the open frame. Materials that shrink as they cool, such as ABS and ASA, need an enclosed chamber to print reliably, and that is the point at which the P1S or P2S becomes the better buy. If your work is PLA and PETG at small sizes, the A1 Mini does it faster and for less.

Printer	Build volume	Enclosure	Best for
Bambu Lab A1 Mini	180 × 180 × 180 mm	Open frame	Small PLA, PETG and TPU parts; four colours with AMS Lite
Bambu Lab P1S	256 × 256 × 256 mm	Enclosed	ABS and ASA as well as everyday work, up to 16 colours with stacked AMS units
Bambu Lab P2S	256 × 256 × 256 mm	Enclosed	The newer platform: hardened steel extruder and nozzle, filament drying in AMS 2 Pro

Frequently asked questions

How big a part can the A1 Mini print?

180 × 180 × 180 mm. For larger parts, the P1S and P2S offer a 256 mm cube and the large-format CreatBot machines go up to a cubic metre.

Can it print in multiple colours?

Yes — four colours with the AMS Lite, which ships as the Combo. Multi-colour printing requires the AMS; it is not built into the toolhead.

Does it need an enclosure for ABS or ASA?

Yes, if you want those materials to print reliably. ABS and ASA shrink as they cool, and the A1 Mini has no chamber to hold heat around the part — that is what the enclosed P1S and P2S provide. For PLA, PETG and TPU the open frame is fine.

How much setup does it need?

Very little: full-auto calibration handles Z-offset, bed levelling, vibration resonance and nozzle pressure by itself, so there is no manual tuning to learn.

Does it come with a Malaysia warranty?

Yes — we supply it as an official Malaysia set with local warranty and support, including installation guidance and application help after purchase.

What does the Bambu Lab A1 Mini cost in Malaysia?

We quote with current pricing rather than a fixed web price, because the bundle changes with the AMS and accessories. Tell us what you want to print and we will quote against it.

Technical Specification

Body

Build Volume:	180 x 180 x 180 mm³
Chassis:	Steel + Extruded Aluminum

ToolHead

Hot End:	All-Metal
Extruder Gears:	Steel
Nozzle:	Stainless Steel
Max Hot End Temperature:	300 ℃
Nozzle Diameter (Included):	0.4 mm
Nozzle Diameter (Optional):	0.2 mm, 0.6 mm, 0.8 mm
Filament Cutter:	Yes
Filament Diameter:	1.75 mm

Heatbed

Compatible Build Plate:	Bambu Textured PEI Plate Bambu Smooth PEI Plate
Max Build Plate Temperature:	80 ℃

Speed

Max Speed of Toolhead:	500 mm/s
Max Acceleration of Toolhead:	10000 mm/s²
Max Hot End Flow:	28 mm³/s @ABS (Model: 150*150 mm single wall; Material: Bambu ABS; Temperature: 280 ℃)

Cooling

Part Cooling Fan:	Closed Loop Control
Hot End Fan:	Closed Loop Control
MC Board Cooling Fan:	Closed Loop Control

Supported Filament

PLA, PETG, TPU, PVA:	Ideal
ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer:	Not Recommended

Sensors

Monitoring Camera:	Low Rate Camera (up to1080P) Timelapse Supported
Filament Run Out Sensor:	Yes
Filament Odometry:	Yes
Power Loss Recover:	Yes
Filament Tangle Sensor:	Yes

Physical Dimensions

Dimensions:	347 x 315 x 365 mm³
Net Weight :	5.5 kg

Electrical Requirements

Input Voltage:	100-240 VAC, 50/60 Hz
Max Power:	150 W

Electronics

Display:	2.4 inches 320*240 IPS Touch Screen
Connectivity:	Wi-Fi, Bambu-Bus
Storage:	Micro SD Card
Control Interface:	Touch Screen, APP, PC Application
Motion Controller:	Dual-Core Cortex M4

Software

Slicer:	Bambu Studio supports third-party slicers which export standard Gcode such as SuperSlicer, PrusaSlicer and Cura, but certain advanced features may not be supported.
Slicer Supported OS:	MacOS, Windows

Wi-Fi

Frequency Range:	2412 MHz – 2472 MHz (CE) 2412 MHz – 2462 MHz (FCC) 2400 MHz – 2483.5 MHz (SRRC)
Transmitter Power (EIRP):	≤ 21.5 dBm (FCC) ≤ 20 dBm (CE/SRRC)
Protocol:	IEEE 802.11 b/g/n